New generation - HB-MFR receiver with minimum power consumption only 0.3 Watt .Used with our bran-new Solar-Powered Wireless Infrared series Detector make your home safer and the earth greener.
 
The HB-MFR use power supply from a standard wall outlet and can be placed on a table or mounted on the wall.
When receiver gets a signal from the Detector one of 4 different tones(beep,wind-bell, plink, clarino) will sound for about 8 seconds. There is also a volume control (figure1-4) so you can set the sound to the desired level.the receiver is also equipped with 4 form c relays(one for each zone) and one 14 VDC output terminal that can activate when a signal is received (figure1-3).
The receiver can be user porgrammed so the 14VDC terminal and relays will activate for 1 second,10 seconds, 60 seconds or 5 minutes.the tones will sound for several seconds.
 
Note 1: for maximum range between the Detector and receiver, the receiver should be mounted horizontally on a wall and as high off the floor as possible.
Although the maximum range is about 300-800 meters(depend on detector model), things such as hills ,trees, metal siding and stucco can all reduce the range.
Used for living room etc.
Frequency:434.6MHz
Operating voltage :15VDC
Operating current: Standy 20mA   Alarming 180mA
14volt DC output current:400ma maximum
Relay rating: 24VDC or 120VAC at 2A
N/A